Solution 4a): Install the COM1 interface. Reason 4: There is no COM1 interface (COM3 instead, for example) Solution 3: Deactivate the infrared interface.
Reason 3: The infrared interface is active. Reason 2: The COM1 interface is taken by a serial printer. Solution 1: Check the programmes that are started automatically when Windows is This programme could be “HotSync” for Palm or “ActiveSync” Reason 1: The error was caused by another programme that accessed the COM1 Is generated when loading the utility file into the Tool Set.
IFH-0038: Interface Command not implementedĮrrors IFH-0006 and IFH-0018 occur if any SGBD is loaded in the Tool Set. Solution: Therefore, before you start the ToolSet, you must exit INPA!!!ģ.IFH-0006: Command not accepted and IFH-0018: Initialization Error and Reason: This error message appears if you start the Tool Set while an INPA BMW script is Multiple diagnostics logs and is not connected to the controller.Ģ.EDIABAS Error 126 (only up to Ediabas V6.4.x) Reason: This message comes when an SGBD has an automatic concept switch between INPA BMW Tool Set Error Messages Trouble Shootingġ.EDIABAS error 100: SYS-0010: INITIALIZATION ERROR Here share INPA BMW tool set error messages trouble shooting.Hope it can help every INPA BMW owner. INPA BMW cable is the strong diagnostic cable for BMW.Many client got problem with tool set error when using.